Valland

VALLAND is a proud manufacturer of high quality and made in Italy ball, gate and check valves, 100% internally engineered. Valland was established in 2006 based on many years’ experiences of valve servicing. The Management and the Ownership have all together more than a century experience in the world of Valves for Oil & Gas Lines. Valland’s Quality System is according to ISO 9001:2008 and regulated by strict internal procedures for quality control and quality assurance. Valland is proud to have for its valve four API monograms: API 6A, API 6D, API 6DSS, API 17D. The last two are related to subsea application.

Ball Valves:


  • Split body side entry or one piece top entry
  • Trunnion Mounted
  • Floating Seats
  • Soft or Metal to Metal Seated
  • Double Block & Bleed
  • Self-relieving seats or Double Piston Effect
  • RF, RTJ, BW or HUB ends
  • ANSI/ASME classes from 150 to 4500 – Sizes from ½” to 56” according to API 6D
  • API classes from 3000 to 15000 – Sizes up to 11”

Expended Gate Valves:


  • Cast or Forged Body and Bonnet
  • Slab Type or Double Expanding
  • Double Block & Bleed
  • Direct Acting or Reverse Acting
  • RF, RTJ, BW or HUB ends
  • ANSI/ASME classes from 150 to 4500 – Sizes from ½” to 56” according to API 6D
  • API classes from 3000 to 15000 – Sizes up to 11”

Main Materials:


  • Wide ranges of materials: A105/A216 WCB, A350 LF2/LF3, A182 F316, A182 F6A & F6NM, A182 F51, F53 or F55, A182 F44, A182 F11, F22, F5 and F9, Inconel 625, Incoloy 825, Hastelloy, Monel, Titanium Gr.2 & Gr.5

Appendices